4 Release buttons
To remove the blender foot,
simultaneously press both release
buttons.
5 Blender foot
Plastic or metal (depending on model).
Attach the blender foot and lock into
position.
6 Blender blade
7 Blender jug
Using the blender jug will prevent the
ingredients from splashing.
For some models:
8 Lid
Place the lid on the blender jug to keep
in the processed ingredients.
9 Whisk with gear
10 Masher attachment with gear
11 Universal cutter
A universal cutter can be ordered from
customer service (order no. 657247).
12 Lid
Place the lid on the universal cutter to
keep in the processed ingredients.
Tip: With the universal cutter use the
appliance at full power to prepare honey
spread (according to the recipe). You can
find the recipe in the instructions for use of
the universal cutter.
Operation
The appliance is suitable for blending may-
onnaise, sauces, mixed drinks, baby food,
cooked fruit and vegetables. For puréeing
soups. Use the universal cutter for cutting/
chopping raw food (onions, garlic, herbs)!
It is recommended to use the supplied
blender jug. However, other suitable recep-
tacles can also be used.
Attention!
The bottom of the receptacle which you use
must not have any bumps or recesses.
■ Before using the appliance for the first
time, clean all parts of it.
X Fig. B
■ Completely unwind the power cord.
■ Place the blender foot on the base unit
and lock into position.
■ Insert the mains plug.
■ Place food in the blender jug or another
tall receptacle.
The appliance works better if there is some
liquid in the ingredients.
■ Firmly hold the hand blender and jug.
■ Switch on the hand blender by pressing
the required On button (Normal speed/
Turbo speed).
In general, Turbo speed is recommended
for the processing of food. Use Normal
speed for liquids and hot food.
Tip: When switching on the hand blender,
hold it at a slight angle to prevent it from
"sticking" to the bottom of the blender jug.
The hand blender remains switched on as
long as the On button is pressed.
To prevent the ingredients from splashing,
do not press the On button until the blender
foot has been immersed in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.
■ Release the On button after processing.
After using the appliance:
■ Remove mains plug.
■ Press the release buttons and remove
the blender foot from the base unit.
Cleaning
Attention!
Never immerse the base unit in liquids and
do not clean in the dishwasher. Do not use a
steam cleaner! Do NOT use abrasive clean-
ing agents. Surfaces may be damaged.
Tip: If processing e.g. red cabbage and
carrots, the plastic parts will become
discoloured by a red film which can be
removed with a few drops of cooking oil.
■ Pull out the mains plug.
■ Remove the blender foot from the base
unit.
■ Wipe the base unit with a damp cloth
en
Operation
5