GE B30 Technical Reference Manual page 235

B30 monitor language files installation
1. Follow above steps 1-4 to enter Software download mode.
2. Click the check box beside Language File to choose the language download option; click
the Browse button to choose the language you want to install.
NOTE: All information in the figure is just for reference.
3. Press Download button to start language download.
NOTE: When the installation is finished, the monitor still in the software download
mode, you can continue to install another language, or restart the monitor
manually.
Emergence download
The emergence download method is intended for the situation when the main software of the
monitor is damaged or the monitor can't go to the normal screen.
1. Connect PC and B30 monitor into the same network with a network cable, and make sure
the monitor is on.
2. Close the firewall and set the IP Address as 126.1.1.2, set the Subnet mask as 255.0.0.0 in
PC.
3. Disconnect the power cord and remove all batteries to reset the monitor. Wait at least for
30 senconds, switch the monitor back on.
4. Open the ProgMon.exe in PC.
Software download instruction
Document no. 2044677-001
A-3