Table Of Contents - Toro TX 1000 Operator's Manual

Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Go to www.Toro.com to access warranty, parts, and
other product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Slope Safety ....................................................... 3
Attachment Safety .............................................. 4
Maintenance and Storage Safety........................ 4
Before Digging.................................................... 4
Safety and Instructional Decals .......................... 5
Setup ........................................................................ 6
1 Preparing the Machine..................................... 6
2 Install the Connector and Connector Mount
Bracket............................................................ 7
3 Connecting the Loader Arm Branch ................. 8
4 Connecting the Relay and Power Lead
Connectors ....................................................11
5 Removing the Existing Lever.......................... 13
6 Installing the 4-in-1 Bucket Lever ................... 14
7 Installing the Valve Manifold Solenoid
Harness ........................................................ 15
8 Testing the Installation ................................... 16
9 Completing the Installation............................. 17
g243011
Product Overview ................................................... 17
Controls ........................................................... 17
Specifications .................................................. 18
Maximum Material Density at Capacity ............. 19
Operation ................................................................ 20
Installing and Removing the Attachment ........... 20
4-in-1 Operation and Control ............................ 20
Transport Position ............................................ 20
Bucket Operation.............................................. 21
Blade Operation ............................................... 21
Leveller Operation ............................................ 21
Grapple Bucket Operation ................................ 21
Maintenance ........................................................... 22
Recommended Maintenance Schedule(s) ........... 22
Lubricating the Bucket ...................................... 22
Adjusting the 4-in-1 Bucket Operation............... 22
Storage ................................................................... 23
Troubleshooting ...................................................... 24
Schematics ............................................................. 25
2
Figure 2
Safety-alert symbol
Contact us at www.Toro.com.
Printed in Australia
All Rights Reserved
g000502