Specifications - Toro TX 1000 Operator's Manual

Loader Arm/Attachment Tilt Lever
Use the loader arm/attachment tilt lever to operate the
4-in-1 bucket (Figure 30).
Important:
For the bucket jaws to operate, you
must have the auxiliary hydraulics lever in the
forward detent position.
Figure 30
1. Lower the loader arms
2. Raise the loader arms
3. Tilt the bucket rearward
g242271
4. Tilt the bucket forward
5. Open/close the bucket
jaws

Specifications

Note:
Specifications and design are subject to
change without notice.
4-in-1 Extra High Volume Bucket
Model
Width
Length
Height
Weight
Capacity (SAE struck
capacity)
Maximum density, heaped
Maximum density, struck
4-in-1 Wide Bucket
Model
Width
Length
Height
Weight
Capacity (SAE struck
capacity)
Maximum density, heaped
Maximum density, struck
4-in-1 Narrow Bucket
Model
Width
Length
Height
Weight
Capacity (SAE struck
capacity)
Maximum density, heaped
Maximum density, struck
18
BU003915
1346 mm
(53 inches)
804 mm
(31.7 inches)
558 mm (22 inches)
212 kg (467.4 lbs)
0.22 m 3 (7.8ft 3 )
2151 kg/m 3
(134.3 lb/ft 3 )
2558 kg/m 3
3
(159.7 lb/ft )
BU003895
1067 mm
(42 inches)
685 mm (27 inches)
558 mm (22 inches)
166 kg (365 lbs)
0.15 m 3 (5.3 ft 3 )
1796 kg/m 3
(112.1 lb/ft 3 )
2156 kg/m 3
(134.6 lb/ft 3 )
BU004001
863 mm (34 inches)
685 mm (27 inches)
558 mm (22 inches)
145 kg (319.7 lbs)
0.12 m 3 (4.3 ft 3 )
1004 kg/m 3
(66.7 lb/ft 3 )
1221 kg/m 3
(76.2 lb/ft 3 )