Bosch CLIMATE 5000 Service Manual page 35

2) Disconnect the connectors (see fig. 61).
Fig. 61.
3) Remove the hex nuts and washers securing the compressor,
located on the bottom plate (see fig. 62).
Fig. 62.
CLIMATE 5000 RAC SINGLE SPLIT (R32) – 6720894076 (2019/08)
4) Heat up the brazed parts and then remove the the discharge pipe
and the suction pipe (see fig. 63).
5) Lift the compressor from the base pan assembly with pliers.
Discharge Pipe
Fig. 63.
NOTICE:
This section is for reference only. Actual unit appearance may vary.
Maintenance and Disassembly
Suction Pipe
35