Bosch CLIMATE 5000 Service Manual page 24

Maintenance and Disassembly
4) Pull out the evaporator (see fig. 27).
Fig. 27.
NOTICE:
This section is for reference only. Actual unit appearance may vary.
24
4. Fan motor and fan
Evaporator
Remove the front panel, electrical parts and evaporator (refer to 1. Front
panel, 2. Electrical parts, and 3. Evaporator) before disassembling fan
motor and fan.
1) Remove the two screws and remove the fixing board of the fan
Fig. 28.
2) Remove the bearing sleeve(see fig. 29).
Fig. 29.
3) Remove the fixing screw (see fig. 30).
4) Pull out the fan motor and fan assembly from the side.
Fig. 30.
This section is for reference only. Actual unit appearance may vary.
NOTICE:
motor (see fig. 28).
NOTICE:
CLIMATE 5000 RAC SINGLE SPLIT (R32) – 6720894076 (2019/08)
Screws
Fixing Screw