Panel Settings - Sony EBS-SP10 User Manual

Monitors: external tv tuner with hospitality support.

Hide thumbs Also See for EBS-SP10:

Table of Contents

SP-TUNE User Manual

Add/Remove Channels – Allows user to add or remove channels (edit the "validity mask")

Map A/V Input to Channel – Allows user to make an association between a channel number and the

8.7 Panel Settings

This menu controls various aspects of interaction with Sony Plasma Display through the RS-232

port. This menu is accessible in Service mode only (not in Stand-alone).

All these parameters do not affect behavior of SP-TUNE, they are transferred to Display Panel in

control packets over the serial port and should be interpreted by Display Panel. If the panel control is

disabled, all other options effectively do not affect anything.

Note that for the serial control interface to work, the Display Panel must be connected to SP-TUNE

using the RS-232 cable.

Model

-- This option controls the RS-232 protocol for the model selected and defaults the

channel browsing using channel +/- buttons (so that a user browses through the

defined channels only). Note that before this operation SP-TUNE must be

connected to RF-antenna or cable TV.

manually.

AV inputs.

position, size, brightness, contras and RGB gains best suited.

Table of Contents