Audio Settings; Tuner Settings - Sony EBS-SP10 User Manual

SP-TUNE User Manual
Timer Logo -- Time, in seconds, for which the "logo" picture is shown after SP-TUNE
Video Position -- Opens the "Video position" submenu, allowing control of picture position on

8.5 Audio Settings

Volume -- Selects the current (default) volume level
Spatial Effect -- Specifies the strength of 3D-spatial effect

8.6 Tuner Settings

Default Chan -- Specifies the default channel, which will be selected upon SP-TUNE power-up.
Rename Current Channel
-- Change the text label assigned to the current channel. This label is shown (if
Show Label -- Setting to enable will show up to an 8 character label specific to the channel
Show Number -- Setting to enable will show up the channel number when changing channels.
Mode -- Select tuner mode (channels allocation) to use, among broadcast and several
Tune Channels -- Scans the channels, looking for valid signal presence, and "remembers" which
powering on.
screen.
If this default channel is set to "0" -- the default channel will be the last channel
selected before the SP-TUNE was powered off.
enabled) on screen, along with the channel number, when the SP-TUNE is
switched to this channel. Display of labels and channel numbers can be globally
disabled on enabled, see the subsequent menu options.
when changing channels.
cable options.
channels are valid and which are not. This "validity mask" is used then for
12