Hitachi CE50-10 Instruction Manual page 93

Figure 5‒16: Configuration for connecting a USB flash drive and maintenance PC to the unit
(2) Configuration No. 2
In this configuration, only the maintenance PC is connected to the unit.
Table 5‒17: Device connected to the unit in configuration No. 2
Device
Maintenance PC
Figure 5‒17: Configuration for connecting the maintenance PC
(3) Configuration No. 3
In this configuration, a monitor, keyboard, and USB flash drive are connected to the unit.
Table 5‒18: Devices connected to the unit in configuration No. 3
Device
Keyboard
Display
USB flash drive
Connection
method
Ethernet This device is used for the operation of data backup, data restore, and program
update functions.
To connect the maintenance PC to the unit, use an Ethernet crossover cable.
Connection method
USB
DisplayPort
USB
5. Configuring Software Environment
Description
Description
This device is used for the operation of data backup, data restore
and program update functions.
Console screen
External media that stores backup data
77