Hitachi CE50-10 Instruction Manual page 194

I. Communication Sheet
I. Communication Sheet
If you need technical assistance from Hitachi during the troubleshooting of this product as described in 8.
Troubleshooting, it is recommended that you first fill in the form shown in Table I‒1: Data sheet. Then share the data
sheet with Hitachi's technical assistance personnel so as to expedite the process.
Inquiries about the product: https://www.hitachi.co.jp/products/it/control_sys/platform/cs_edge/
Enter your inquiries about this product on our website. You will then be contacted by the appropriate department.
Table I‒1: Data sheet
No. Item
1 Lamp status
2 Indication on the display
Note:
The operating system or the BIOS might be updated during repair work. In that case, the OS or BIOS password
and other settings will be initialized.
178
• POWER lamp (POWER): Green, red, off
• STATUS lamp (STATUS): Green, red, off
• DRIVE lamp (DRIVE): Green, green (blinking), red, off
• TEST STATUS lamp (TEST): Green, red, off
• RAS indicator
- AP: Green, red, off
- E3: Red, off
- E2: Red, off
- E1: Red, off
Status