Backup, Restoration, And Program Updates; Device Configuration When Using Each Function - Hitachi CE50-10 Instruction Manual

5. Configuring Software Environment
5.15 Backup, restoration, and program updates
The following functions are available for managing software installed in the unit:
• Backup function
• Restore function
• Program update function
Figure 5‒15: Flow of operations
5.15.1 Device configuration when using each function
To back up or restore data or update programs, you need to connect the necessary peripherals to the unit. Select
configuration No. 1, 2, or 3 according to the operating environment of the unit.
USB flash drive and CFast are available as "external media". In this section, USB flash drive is used as the example.
(1) Configuration No. 1
In this configuration, a USB flash drive and a maintenance PC are connected to the unit.
Table 5‒16: Devices connected to the unit in configuration No. 1
Device
Maintenance PC
USB flash drive
76
Connection
method
Ethernet This device is used for the operation of data backup, data restore, and program
update functions.
To connect the maintenance PC to the unit, use an Ethernet crossover cable.
USB External media that stores backup data
Description