Open Shortest Path First Version 3 Configuration
544
G8264 Command Reference for ENOS 8.4
The following table describes the OSPFv3 commands.
Table 288.
OSPFv3 Configuration Options
Command Syntax and Usage
[no] ipv6 router ospf
Enter OSPFv3 configuration mode.
Command mode: Global configuration
abrtype [standard|cisco|ibm]
Configures the Area Border Router (ABR) type, as follows:
Standard
Cisco
IBM
The default setting is standard.
Command mode: Router OSPF3
no abrtype
Resets the Area Border Router (ABR) type to its default value ‐ standard.
Command mode: Router OSPF3
asexternal lsdblimit <LSDB limit (0‐2147483647, ‐1 for no limit)>
Sets the link state database limit.
The default value is 1.
Command mode: Router OSPF3
[no] enable
Enables or disables OSPFv3 on the switch.
Command mode: Router OSPF3
exitoverflowinterval <0‐4294967295>
Configures the number of seconds that a router takes to exit Overflow State.
The default value is 0.
Command mode: Router OSPF3