© Copyright Lenovo 2017
Table 148.
System Configuration Options (continued)
Command Syntax and Usage
system time <hh>:<mm>:<ss>
Configures the system time using a 24‐hour clock format. The time retains its
value when the switch is rebooted.
Command mode: Global configuration
system timezone [<time zone index (1‐374)>]
Configures the time zone where the switch resides. You are prompted to select
your location (continent, country, region) by the timezone wizard. Once a
region is selected, the switch updates the time to reflect local changes to
Daylight Savings Time, etc.
The time zone can be directly specified using its unique time zone index.
Command mode: Global configuration
no system timezone
Deletes the time zone configuration.
Command mode: Global configuration
system usbeject
Allows you to safely remove a USB drive from the USB port, without
corrupting files on the drive.
Note: Not available in stacking.
Command mode: Global configuration
terminal dontask
Disables CLI confirmation prompts for the current session. The switch will
choose the default answer.
By default, CLI confirmation prompts are enabled, if they are not configured
differently by using the prompting command.
Note: When using this command any settings configured through the
prompting command will be temporarily disregarded for the duration of the
current session.
Note: In stacking, this command is available only on the Master switch.
Command mode: All
no terminal dontask
Enables CLI confirmation prompts for the current session.
By default, CLI confirmation prompts are enabled, if they are not configured
differently by using the prompting command.
Note: In stacking, this command is available only on the Master switch.
Command mode: All
Chapter 4: Configuration Commands
345