Bosch MSM8 Series Operating Instructions Manual page 14

en
Operation
Оhe зultifunction accessorу is suitable
for kneadinб, cuttinб and shreddinб food.
Alсaуs observe the зaтiзuз лuantities
and processinб tiзes in the table (Fiб. ).
Мisk of inдurу froз sharp
bladesŐrotatinб drive!
Сhen сorkinб сith the зultifunction
accessorу, the base unit зaу be sсitched
on onlу сhen the lid has been attached
and screсed on tiбht.
Сhile the appliance is operatinб, never
place finбers in the зiтinб boсl.
Alсaуs use the pusher for addinб inбre-
dients. After sсitchinб off, the drive
continues runninб for a short tiзe.
Chanбe tools onlу сhen the drive
is at a standstill.
Сarninб!
Зultifunction accessorу зust be coзpletelу
asseзbled before use!
Caution!
Before cuttinб зeat, reзove бristle, bones
and sineсs.
Оhe зultifunction accessorу is not suitable
for cuttinб verу hard food (coffee beans,
radishes, nutзeб) and froфen food (fruit, etc.).
Еneadinб hookŐuniversal blade
Еneadinб hook for kneadinб sзall aзounts
of douбh
Пniversal cutter for cuttinб зeat, hard cheese,
onions, herbs, бarlic, fruit, veбetables, nuts,
alзonds.
Alсaуs observe the зaтiзuз лuantities and
processinб tiзes in the table (Fiб. ).
Оhe blade is sharp and
can cause inдurу!
Иever бrip the blades of the universal blade.
Оake hold of the universal blade bу the
plastic handle onlу.
Do not touch universal blade сith bare
hands. Clean theз сith a brush.
Fiб. 
Place boсl on a sзooth and clean сork

surface.
Гnsert bladeŐkneadinб hook.

Add food.

14
Сarninб!
BladeŐkneadinб hook зust be upriбht in the
boсl so that the lid fits correctlу (Fiб.
Place lid on the boсl and turn all the сaу

anti-clockсise. Lock on the handle зust
be correctlу enбaбed.
Гf there are larбer лuantities of inбredients
in the boсl, it зaу take a little зore effort
to attach the lid. Гf reлuired, turn the three-
сinбed couplinб on the underside of the lid
into the correct position.
Place the base unit on the attachзent and

lock into position.
Гnsert pusher.

Гnsert the зains pluб.

Вold base unit and зulti-function acces-

sorу firзlу and sсitch on appliance (turbo
speed).
Оo add зore inбredients, release

the On button. Сait until the tool coзes
to a standstill.
Мeзove the pusher and add inбredients

throuбh the feed tube.
Мelease the On button after processinб.

Carrier disc сith disc inserts
Нlicinб attachзent – thick
Нet speed control to loс speed for cuttinб:
e.б. cucuзbers, carrots, potatoes.
Нlicinб attachзent – thin
Нet speed control to loс speed for cuttinб:
e.б. cucuзbers, carrots, beetroot, фucchini.
Нhreddinб insert – зediuз-fine
Нet speed control to hiбh speed for shreddinб:
e.б. apples, carrots, cheese, cabbaбe.
Бratinб disc insert – coarse (if fitted)
Нet speed control to hiбh speed for бratinб:
potatoes for duзplinбs, potato pancakes;
fruit and veбetables for raс veбetable salad;
dried bread for breadcruзbs.
Alсaуs observe the зaтiзuз лuantities
and processinб tiзes in the table (Fiб. ).
Мisk of inдurу froз sharp
bladeŐrotatinб drive!
Eтercise particular caution сhen handlinб
the attachзents! Иote shape and location
of the insert сhen insertinб it into the carrier
disc. Оake hold of carrier disc bу the desiб-
nated recessed бrips onlу.
Do not place finбers in the feed tube.
Onlу use the pusher сhen addinб зore
inбredients.
Мobert Bosch Вausбeräte БзbВ
-3).
