Bosch MSM8 Series Operating Instructions Manual page 12

en
, Eтplanation of the sузbols on the appliance or accessorу
Caution! Мotatinб tools.
Do not place finбers in the feed tube.
Do not clean the lid of the зulti-function accessorу
in the dishсasher.
Иever iззerse the lid of the зultifunction accessorу
in liлuids and do not сash under runninб сater.
Before use, read these instructions carefullу in
order to becoзe faзiliar сith iзportant safetу
and operatinб instructions for this appliance.
Please keep the operatinб instructions
in a safe place.
Гf passinб on the appliance to a third partу,
alсaуs include the operatinб instructions.
Пniversal cutter L
Please fold out the illustrated paбes.
Fiб.

1 Пniversal cutter LŐТL
2 Blade
3 Attachзent
4 Lid
5 Гce-crusher-blade (for siфe L onlу) *
*
For soзe зodels.
Сith the universal cutter ТL use the appliance
at full poсer сhen preparinб honeу spread
(for the recipe, see separate Гnstructions
for Пse for this accessorу).
A universal cutter can be ordered froз
custoзer service (order no. 753122).
Operation
Оhe universal cutter is suitable for cuttinб зeat,
hard cheese, onions, herbs, бarlic, fruit,
veбetables, nuts, alзonds.
Alсaуs observe the зaтiзuз лuantities and
processinб tiзes in the table (Fiб. ).
Уou can crush ice сith the ice crusher blade.
Optiзuз processinб лuantitу: 4–6 ice cubes.
12
Оhe blade is sharp and
can cause inдurу!
Иever бrip the blade in the universal cutter.
Оake hold of the universal cutter blade
bу the plastic handle onlу.
Do not touch blade of the universal cutter
сith bare hands. Clean theз сith a brush.
Сarninб!
Оhe universal cutter зust be coзpletelу
asseзbled before use!
Caution!
Before cuttinб зeat, reзove бristle, bones and
sineсs.
Оhe universal cutter is not suitable for cuttinб
verу hard iteзs (coffee beans, radishes,
nutзeб) and froфen food (fruit, etc.).
Fiб.

Place the universal cutter on a sзooth,

clean сork surface and press.
Гnsert the blade.

Add food.

Сarninб!
Blade зust sit straiбht in the universal cutter
so that the attachзent sits correctlу (Fiб.
Place the attachзent on the universal

cutter and rotate in a clockсise direction
until it clicks into position.
Place the base unit on the attachзent

and lock into position.
Гnsert the зains pluб.

Вold the base unit and universal cutter

firзlу and sсitch on the appliance
(turbo speed).
Мelease the On button after processinб.

Мobert Bosch Вausбeräte БзbВ
-3).
