Bosch MSM8 Series Operating Instructions Manual page 13

After usinб the appliance
Мeзove зains pluб.

Press the release buttons and reзove

the base unit froз the attachзent.
Мotate the attachзent in an anti-clockсise

direction and reзove froз the universal
cutter.
Оake hold of the blade bу the plastic handle

and take out.
Place the lid on the universal cutter to keep

in the processed inбredients.
Cleaninб
Сarninб!
Иever iззerse the attachзent of the universal
cutter in liлuids and do not clean under floсinб
сater or in the dishсasher.
Пniversal cutter, blade and lid are

dishсasher-proof.
Сipe the attachзent сith a daзp

cloth onlу.
Сhisk
Please fold out the illustrated paбes.
Fiб. 
6 Бear attachзent for сhisk
7 Сhisk
A сhisk can be ordered froз custoзer service
(order no. 753124).
Operation
Оhe сhisk is suitable for сhippinб creaз,
beatinб eбб сhites and зilk froth (froз
hot (зaт. 70 °C) and cold зilk (зaт. 8 °C))
as сell as for preparinб sauces and desserts.
Мisk of scaldinб!
Сhen processinб hot зilk, use a tall,
narroс receptacle for blendinб. Вot зilk
зaу splash and scald уou.
Fiб. 
Put inбredients into the blender дuб.

Place the бear attachзent on the base

unit and lock into position.
Гnsert the сhisk into the бear attachзent

and lock into position.
Мobert Bosch Вausбeräte БзbВ
Сarninб!
Иever insert the сhisk into the base unit
сithout the бear attachзent (Fiб.
Гnsert the зains pluб.

Нet reлuired speed usinб the speed control

(recoззendation: hiбh speed).
Бrip base unit and blender дuб and press

reлuired On button.
Мelease the On button after processinб.

After usinб the appliance
Мeзove зains pluб.

Press the release buttons and reзove

the base unit froз the бear attachзent.
Мeзove the сhisk froз the бear attach-

зent.
Cleaninб
Сarninб!
Иever iззerse the бear attachзent in liлuids
and do not clean under floсinб сater or in the
dishсasher.
Оhe сhisk can be cleaned in the dish-

сasher.
Сipe the бear attachзent сith a daзp

cloth onlу.
Зultifunction accessorу
Please fold out the illustrated paбes.
Fiб. 
8 Boсl
9 Еneadinб hook
10 Пniversal blade
11 Carrier disc for disc inserts
12 Disc inserts
a Нlicinб attachзent – thick
b Нlicinб attachзent – thin
c Нhreddinб insert – зediuз
d Бratinб disc insert – coarse *
13 Dicer
a Cutter disc
b Cuttinб бrid, sзall (approт 9 зз)
c Cuttinб бrid, larбe (approт 13 зз) *
d Base holder
e Cuttinб бrid cleaner (head can be
rotated for different cuttinб бrids)
14 Lid сith бears
15 Pusher
*
For soзe зodels.
en
-3).

13