Table of Contents
Advertisement
GENERAL INFORMATION
1.2
STOP THINK ACT
STOP: Take the time to think about
the installation process. Consider the
outcomes of the actions needed to be
taken, worst thing that could happen?
THINK: How are you going to do it, is it
the safest way? if not, how can you do
it better? Do I have the right PPE, tools
and equipment.
ACT: Go about it in the safest way
possible.
manual here and dont rush. STOP if it
can't be done safetly.
NOTE: These cabinets are heavy, can
have high centres-of-gravity (thus
'tippy'), use appropriate PPE and tools
and manpower levels.
1.3
STAFF TRAINING
This manual is to be used to understand and safely
execute the installation & maintenance of the
appliance. It is the installer & users responsibility to
carry out the instructions illustrated within the manual
correctly. The installer & user is responsible for setting
out the the training and requirements needed for their
maintenance technician staff to be educated to use the
case correctly. The case should always be kept in good
working order to ensure installer and user safety.
Injury to personnel and damage to the case and its
components may occur if instructions in the manual
are not correctly followed. If information would like to
be added to this manual, or if suggestions would like to
me made, contact Hussmann directly at any time.
PAGE 5
Follow
this
installation
1.4
ELECTRICAL CONNECTION
Check that the power supply voltage matches that
displayed on the rating plate of the case, and that the
power is adequate. Voltage provided should be ±10%
of rating plate. Electrical should be hard wired by an
authorised electrician to comply with all local electrical
regulations. Failure to do so could result in electric
shock or fire.
1.5
REFRIGERANTS
Installation & Maintenance must be
performed by qualified technical
personnel with appropriate training
and authorisation to work with
flammable refrigerants.
R134a :
The refrigerant R134a is not flammable. Pay close
attention during transport, installation and dismantling
not to damage the refrigerant pipelines.
EVENT OF DAMAGE:
Keep flames or sources of ignition away from the
appliance. Properly ventilate the premises for a few
minutes. Turn the unit off and notify the customer
service department. Although not flammable this
material will become combustible when mixed with air
under pressure and exposed to strong ignition sources.
SMED SEMI VERTICAL - HUSSMANN
Advertisement
Table of Contents
