Table of Contents
Advertisement
PRE INSTALLATION
2.3
HANDLING AND TRANSPORTING CASES
The cabinets must be stored indoors, with a
temperature ranging between 0
humidity between 30% RH and 90% RH.
Before storing the cabinets, ensure packaging is
unbroken and does not display defect that may
compromise preservation of the cabinets.
Avoid UV rays:
Permanent deformation of plastic
materials or damage of cabinet
parts. DO NOT store the
in uncovered areas exposed to
atmospheric agents and to direct
sunlight.
2.4
SHIPPING DAMAGES AND SHORTAGES
Packaging needs to be disposed of
page
33).
by the installer and/or user.
Where possible please recylce as
many items as possible.
After removing packaging, inspect the case for any
shipping damage and ensure that all case inclusions,
such as trims etc are accounted for. Immediately
report any shipping damage to the carrier and inform
Hussmann Customer Service of any short supplies.
Where possible all packaging and shipping braces
should be removed before cases are put into there
approx final position.
•
Apparent loss or damage. If there is an obvious
loss or damage it must be noted on the freight
documentation receipt supplied by the Transport
Company and notification to Hussmann or
representative within seven (7) days of delivery.
PAGE 10
C and +40
C and a
0
0
cabinets
responsibly (refer to
•
Concealed loss or damage After removing all
packing etc confirm with the parts list, attached to
case for any short supplied and or damaged trims,
product fences etc. If required notify Hussmann or
representative within seven (7) days of delivery.
NOTE:
for all hazardous substances used
during installation in relation to their
application, PPE, first aid, disposal
and emergency management. Refer
page 20 (Risk Analysis) For MSDS
sheet
contact
CAUTION:
avoid damage to drainage outlets and
electrical equipment mounted under
or at the rear of cases
INSPECT
LIFTING WITH FORKLIFT.
CAUTION:
confirm that the equipment used is
approved for such works.
Do not lift or drag the case by the Patch
End as this may damage both the case
and/or on ends.
Refer to your companies' safe working
procedure (SWP) when handling cases
such as forklifts, trolleys etc.
SMED SEMI VERTICAL - HUSSMANN
Refer to product MSDS
your
Hussmann
Care must be taken to
UNDERSIDE
BEFORE
When moving cases
Advertisement
Table of Contents
