Table of Contents
Advertisement
GENERAL INFORMATION
1.1
SYMBOLS:
TURN OFF:
is disconnected when conducting any
servicing or inspection. Injuries such
as electric shock or burns could occur.
NO FLAMMABLE:
case to any flamable objects. This may
cause ignition and explosion due to
spark.
WEIGHT:
limit of each shelf. Each standard shelf
has a total maximum weight limit of
180kg/m2.
PRESSURE & VACCUM TEST :
Ensure a pressure and Vaccum test is
conducted. The leakage of refrigerant
may result in poor performance or
NO GAS:
flammable gas could be realeased.
If gas leaks out and flows around the
case there can be risk for fire.
EARTHING :
when
components. Electric shock or fire may
occur if not correctly processed.
PAGE 4
Ensure that power source
Do not expose the
Do not exceed the weight
Do not install the case where
Ensure case earthed
proceeding
with
electical
TECHNICIANS ONLY:
should only be performed by qualified
technicians.
NO OBJECTS ON CASE:
place objects, stack or use the top of
the case as storage. Object may fall
and cause injury to personnel and /or
damage to the case.
NO A/C:
Do not install case where
air blows directly at the case. This will
disrupt the case airflow and affect
performance.
NO WET HANDS: Ensure not to
touch switches or any component
with wet hands.
This may cause
electrical shock.
NO FLAMMABLE :
Do not keep any
volatile or flammable materials inside
the case. It may risk explosion or fire.
NO CONNECTING SOCKETS: Do
not use any connecting socket
or extension cords.
Be sure to use
private line or socket as the main
power source. Failure to do so could
result in electric shock or fire.
SMED SEMI VERTICAL - HUSSMANN
Installation
Do not
Advertisement
Table of Contents
