Channel List - Silvercrest LT 1510 User Manual And Service Information

Channel List

The channel list is accessible via the TV menu. To display it, select the Channel Edit option from the
TV menu.
Renaming a Channel
You can name a channel with any name containing up to seven characters. Proceed as follows:
1. In channel list, press  or  (32) on the remote control to select the channel preset that
stores the channel you want to rename.
2. Press the OK button (32) on the remote control to select the existing name. The first character
will be highlighted.
3. Press  or  (32) on the remote control to select the desired character and press OK (32) to
confirm.
4. Repeat the above process until the desired name has been written.
5. Press  /  /  /  (32) on the remote control to select "OK" and press OK (32) to confirm.
Or select "Cancel" to cancel and to restore the previous name.
Sorting Channels
To re-sort the channel list you can swap the preset channels individually. It is also possible to use
this function to store a different channel on the preset whose original channel has been deleted.
1. In channel list, press  or  (32) on the remote control to select the channel preset that
stores the channel you want to move.
2. Press the  button (32) on the remote control to start the moving process. The selected chan-
nel preset is marked.
3. Press  or  (32) on the remote control to move the highlight to the channel preset where
you want to move the previously selected channel to.
4. Press the OK button (32) to swap the channels or press the MENU button (50) to cancel.
Signal Source "TV" (Analogue TV Reception)
35