Function" Menu - Silvercrest LT 1510 User Manual And Service Information

"Function" Menu

Language
Video Size
TT Language
Sleep Timer
OSD Timer
Blue Screen
Reset
Child Lock
Installation
Here you select the menus' display language.
Here you can set the desired picture aspect ratio. You can choose between
Full, 4:3 and Subtitle.
Optimises the character set for Western or Eastern European Teletext (for
analogue TV (signal source "TV") only.
Allows programming the auto power-off after 15, 30, 45, 60, 75, 90, 105 or
120 minutes. Select "Off" to disable the auto-off function.
Select the display time for the OSD menu between 5 and 60 seconds. Select
„Off" to keep the OSD menu always visible. To hide it, press EXIT (33) or
MENU (50).
When selecting a signal source and no device is connected to the particular
connector or the device does not supply any signal, a blue screen will appear
as long as this function is enabled: otherwise a noisy image will appear.
Resets the factory-default settings of the TV menu. Warning! All custom set-
tings except the child lock password will be erased after the safety prompt
has been confirmed with "Yes".
The child lock lets you protect the access to the "installation" menu or enable
the keylock.
This factory-default password is „0000". If required, you can enter a custom
password by typing it into the fields "Enter New Password" and "Enter Pass-
word Again".
This lets you execute the First Time Installation wizard manually. It helps you
perform an automatic channel search based on the country and language
selection.
Signal Source "DTV" (Digital TV Reception)
23