Silvercrest LT 1510 User Manual And Service Information page 173

Signal Source "DTV" (Digital TV Reception)
Deleting Digital Channels
You can remove any undesired channel from the channel list. Proceed as follows:
1. Open the "DTV" menu. To do this, press the MENU button (50) on the remote control, press
the  or  buttons (32) to navigate to the fourth option and press .
2. Press  or  (32) on the remote control to select the option "Ch. Manage" and press OK to
open the "DTV/Channel Manage" submenu.
3. Press  or  (32) on the remote control to select the option "Ch. Orgn." and press OK to
open the Channel Organizer.
4. Press  or  (32) on the remote control to select the desired channel.
5. Press the green button to mark the current channel for deletion. Next press the OK button (32)
and confirm the safety prompt that appears in order to delete it from the channel list.
Press the MENU button (50) to cancel the above process at any time.
Locking Digital Channels
You can lock specific channels so that unauthorised persons cannot watch them. These channels
can be watched only after entering the correct password. To do this you'll have to enable the child
lock function from the "Function" menu first (see page 23 – Child Lock).
1. Open the "DTV" menu. To do this, press the MENU button (50) on the remote control, press
the  or  buttons (32) to navigate to the fourth option and press .
2. Press  or  (32) on the remote control to select the option "Ch. Manage" and press OK to
open the "DTV/Channel Manage" submenu.
3. Press  or  (32) on the remote control to select the option "Ch. Orgn." and press OK to
open the Channel Organizer.
4. Press  or  (32) on the remote control to select the desired channel.
5. Press the blue button and enter your password (the default password is "0000").
The current channel will be locked and can be watched only after entering the correct password.
Press the MENU button (50) to cancel the above process at any time.
To unlock the channel, repeat the above steps.
You can also select multiple channels one after the other and mark as locked. After
this you only need to press the OK button (32) and enter you password once to set all
channels simultaneously as locked channels.
26