Getting Started; Connecting The Power Adapter - Silvercrest LT 1510 User Manual And Service Information

Getting Started

Connecting the Power Adapter

1. Connect the small round-shaped plug (A) of the cable that is fixed to the power adapter to the
DC input (5) located on the right of the housing (see page 10).
2. Connect the plug (B) of the power cord to the power adapter.
3. Connect the mains plug (C) of the power cord to a wall outlet.
4. Toggle the main power switch (D) of the power adapter to On (position "I").
The power adapter has a small LED indicator on its upper panel. While the power
adapter is connected to the mains and the toggle switch (D) is in (position "I") this
LED will light green. If the toggle switch (D) is off (position "0") or the power cord is
not connected to a functioning wall outlet it does not light.
Getting Started
7