Cic Pro Center; Optional Components; Apex Oximeter; Xpod Oximeter - GE ApexPro Operator's Manual

Equipment overview

CIC Pro center

Optional components

Apex oximeter

Xpod oximeter

Accutracker DX noninvasive blood pressure (NBP) monitor

2-4
The CIC Pro center displays real-time data acquired from up to 16 networked GE
monitors or transmitters. The CIC Pro center displays this telemetry bed patient data
along with the patient data acquired from other monitors. The transmitter number is
displayed under the ECG parameter window.
The CIC Pro center is also used to define telemetry defaults. For more information,
refer to System setup on page
CAUTION
Do not use the Apex oximeter on neonatal patients. It is not designed
for use on neonates.
An Apex oximeter can be connected to a transmitter in order to monitor the patient's
pulse oximetry data and send the SpO2 data for display at the CIC Pro center. Only
digital data is available; no waveforms are generated or transmitted. Digital data is
stored in Graphic Trends and Vital Signs. For setup information, refer to
oximeter on page 3-8.
CAUTION
Do not use the Xpod oximeter on neonatal patients. It is not
designed for use on neonates.
An Xpod oximeter can be connected to a transmitter in order to measure arterial
oxygen saturation (SpO2), peripheral pulse rate (PPR), and perfusion quality and send
the data for display at the CIC Pro center. For setup information, refer to
oximeter on page 3-7.
NOTE
The Accutracker DX noninvasive blood pressure monitor has been modified by
SunTech Medical Instruments to operate with the ApexPro system.
An Accutracker DX noninvasive blood pressure monitor can be connected to a
transmitter in order to measure the systolic and diastolic blood pressure. The
transmitter sends the measurement data for display at the CIC Pro center. Digital
values are stored in Graphic Trends and Vital Signs. For setup information, refer to
Accutracker DX on page 3-10.
ApexPro™
4-1.
Apex
Xpod
2001989-200E