GE ApexPro Operator's Manual page 150

Viewing stored patient data
Full disclosure data
8-6
Complete the following procedure to view or print an event strip or data sample
stored in the Events directory:
1. From the single patient viewer, click Patient Data... > Events. The Events
directory displays.
2. Sort the data by event time or by event type.
3. Use the scroll bar to move up or down through the list of events and data
samples.
4. Click on a single event or data sample you want to view or print.
5. From the patient data menu, click Event Strip. The selected event strip displays.
6. To print this strip, click
single patient viewer.
NOTE
This section provides a brief overview of the Full Disclosure function. For more
information, refer to the CIC Pro Clinical Information Center Operator's Manual.
An admitted patient's parameter waveforms and numeric data is continually collected
for a maximum of 72 hours (license dependent). After the maximum hours of data
collection have elapsed, the oldest data is deleted to accommodate newer data.
NOTE
The amount of full disclosure data collected for a patient is determined by the
type of licenses installed on the CIC Pro center. One hour of full disclosure data
collection and storage is standard without additional licensing.
You can view full disclosure data using the following data review tools:
Full disclosure strip: Automatically scan forwards and backwards through full
disclosure data for specific areas of interest.
Full disclosure page: View full disclosure waveform data in a full page format
and view specific areas of interest.
ApexPro™
(print button) located in the upper right corner of the
066A
2001989-200E