Table of Contents
Advertisement
22/29
Ordering information
13 Error causes and troubleshooting
Repairs at the device by the customer are not permitted. Exceptions
are maintenance works listed in the chapter "Maintenance".
For further information in the event of repair, please contact the
Bosch Rexroth Service.
For error display on the PC box, refer to
play" on page
21.
Error
No screen at monitor at XF13 (HDMI)
Tab. 13-1:
Error causes and troubleshooting
14 Maintenance
Only the maintenance works at the device listed in this chapter are
permitted.
For further information in the event of repair, please contact the
Bosch Rexroth Service.
NOTICE
Ensure that the IP degree of protection is retained during maintenance!
14.1 Scheduled maintenance tasks
Check all plug and terminal connections of the components for proper tight-
●
ness and possible damage at least once a year
Check for wire breaks or crimped lines.
●
Damaged parts must be replaced immediately.
●
15 Ordering information
15.1 Accessories and spare parts
For ordering information on accessories and spare parts, refer to
"Spare parts, accessories and wear parts" on page
Bosch Rexroth AG R911389662_Edition 02
IndraControl PR21 Embedded Automa-
chapter 12.2 "Operating and error dis-
Correction
Connect the supply voltage and check the XD1
●
connection
Connect the HDMI cable correctly
●
Loss of IP degree of protection due to incorrect
maintenance.
tion Computer
5.
chapter 5
Hide quick links:
Advertisement
Table of Contents
