Overall Connection Diagram - Power Supply Unit And Embedded Automation Computer; Commissioning; Security; Network Configuration - Bosch IndraControl PR21 Operating Instructions Manual

20/29

Commissioning

10.3.2 Overall connection diagram – Power supply unit and embedded
automation computer
230 V~
Fig. 10-9: Overall connection diagram – Power supply unit and embedded automation com-
puter
11 Commissioning
11.1 IT security
The operation of installations, systems and machines requires the implementa-
tion of an integral concept for state-of-the-art IT security. Bosch Rexroth prod-
ucts are part of this integral concept. Bosch Rexroth product characteristics
have to be taken into consideration in an integral IT security concept. The rele-
vant characteristics are documented in the IT security guideline (R911342562).

11.2 Network configuration

See "Rexroth IndraControl PR and VR Devices Software Applica-
tions".

11.3 Interface configuration XF50, XF51

The device variant NC contains two serial interfaces XF50 and XF51. These serial
interfaces are configured in the BIOS of the devices. Proceed as follows:
Connect a USB PC keyboard and an HDMI monitor to PR21
●
Switch on the supply voltage of PR21
●
Press "Del" on the USB PC keyboard to access BIOS
●
Go to "Advanced – IT8768E Super IO Configuration" in BIOS
●
The XF50 and XF51 interfaces can be configured as follows:
XF50 Serial port 1 configuration
XF51 Serial port 2 configuration
Tab. 11-1: Configuration XF50, XF51
The following configurations are available:
Bosch Rexroth AG R911389662_Edition 02
24 V
Ext. power supply
230 V 24 V
IndraControl PR21 Embedded Automa-
2
1
XD1
Power cabinet PC
tion Computer