About This Documentation; Overview On Target Groups And Product Phases; Purpose - Bosch IndraControl PR21 Operating Instructions Manual

IndraControl PR21 Embedded Automa-
tion Computer

1 About this documentation

Editions of this documentation
Edition Release Note
Date
01 2018-04 First edition
02 2019-11 Notes on WLAN, Bluetooth and 4G removed, updates
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the "mechan-
ic/electrician" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group

1.2 Purpose

This document instructs the technical staff of the machine manufacturer on how
to perform the mechanical and electrical installation safely and on how to com-
mission the device.
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
About this documentation
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
R911389662_Edition 02 Bosch Rexroth AG
1/29
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose