Colour Letter Scanner CLSC3000 in postal automation systems. It also includes important information and safety instructions which must be strictly observed. Before starting the installation of the Colour Letter Scanner CLSC3000 read this installation manual completely and carefully. Follow all safety instructions.
Peripherals, Maintenance Instructions" for maintenance tasks (cleaning / replacing the air filter in the computer). OEM documentation Colour Letter Scanner CLSC3000 [ refer to Chromasens CLSC3000, page 13-1] IDH [ refer to Pyramid Computer, page 13-2] and [ refer to Silicon...
Note! Keep the original cardboard box and packing material of the Colour Letter Scanner CLSC3000 for later transportation, e g. for return to Siemens for repair. If the original packaging is not being kept, it has to be ensured that the scanner is otherwise sufficiently protected for shipment.
CLSC3000 Target Group Target Group This Colour Letter Scanner CLSC3000 documentation is addressed to maintenance personnel. Maintenance personnel require knowledge about the mechanical, electrical and electronic components, as well as the hardware and software. Step-by-step descriptions of routine maintenance and adjustment work are, of course, provided by the documentation, but the overall complexity of the tasks demands that only qualified technicians are employed.
Interface Specification IDD_TCIS – Machine / Serial Interface "Canada TCIS Interface Specification" EMC Characteristics The CLSC3000 complies with EC directive 2004/108/EC (EMC directive) and with the requirements of Subpart B of Part 15 of the Federal Communication Commission (FCC) Rules for Class A Devices and the Canadian Interference-Causing Equipment Standard ICES-003 for digital apparatus.
The scanner is installed in the mail transport section of the machine at the location specified by the machine supplier. Refer to the documentation "Colour Letter Scanner CLSC3000, Adjustments and Repair", section "Replacing the Colour Letter Scanner" for additional information on scanner installation.
Page 33
The type of lock on the cable connector for secure cable fastening of the power supply and the hardware signal cables are defined by the machine supplier and can be screw locks or quick locks. The camera link cable supplied by Siemens provides connectors with quick locks on both cable ends. Note! The compressed air hose (outer diameter 8 mm) is pushed directly into the compressed air connector of the CLSC.
CD/DVD in case a computer needs to be replaced. See also document “Windows Operating System RC Recovery Kit, Installation Manual”. The software is installed by Siemens technicians as part of the software installation process. The application kit has to be installed prior to the initial scanner start-up.
Turn on the compressed air supply for the CLSC at the manually operated valve located on the transport plate behind the CLSC (for details refer to the documentation "Colour Letter Scanner CLSC3000, Maintenance Instructions"). Switch on the power supply for the scanner in the respective machine module.
Page 38
Repair". Note! In general, no white reference calibration is necessary after installation of a new CLSC3000, because calibration was done at the factory. Note! In general, no adjustment of the parameter settings for transport speed, tachometer resolution and light barrier delay should be necessary after installation of the IDH and its software, because the suitable settings are stored in a configuration file internally.
Page 40
Adjust the parameters by stepwise increasing or decreasing the values so that the image of the CLSC matches the requirements for the image quality as described in the documentation "Colour Letter Scanner CLSC3000, Maintenance Instructions", chapter "Checking the Quality of Grey and Colour Images with a Test Card".
Consult the dealer or an experienced radio/T.V. technician for help. Siemens AG is not responsible for any radio television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Siemens AG.