Moving A Programme: Allocating Programme Selection Buttons - Miele PG 8063 Operating Instructions Manual

Moving a programme: allocating programme selection
buttons
You can sort the programme selection list to suit your requirements
and therefore also allocate the programme selection buttons ,
 and .
Further settings
Open the

the  button and then switch it on again with the  button whilst
keeping the  button held in.
Open the menu as follows:

Further settings

Move programme

All released programmes are shown in the programme list (see "Fur-
ther settings/Programme release"). A programme's position in the
programme list is decisive for allocating the programme selection but-
tons. Programmes are numbered from 1 - n. The first three pro-
grammes in the list are allocated to the programme selection buttons;
for example:
- 1. Sf Special on programme selection button 
2. Sf Special Plus
-
3. Vario Chem on programme selection button 
-
4. Rinsing
-
- etc.
Use the  and  arrow buttons to select the programme you would

like to move.
Confirm your selection with OK.

Now you can move this programme within the list.
Use the  and  arrow buttons to move the programme to the po-

sition you want.
Press OK to save the programme to the selected position.

The programme which was previously saved to this position and all
subsequent programmes are moved down by one position.
The process can be repeated as often as you wish.
Press the  button to exit the menu.

menu by switching the machine off with
Move programme
1. Sf Special
2. Sf Special Plus
on programme selection button 
Further settings
77