Volume
A buzzer which is integrated into the control panel can give an acous-
tic signal in the following situations:
- When buttons are pressed (keypad tone)
- At the end of the programme
- System messages (information)
Open the systems menu by switching the machine off with the
button and then with the held in switch it back on with the
button.
Open the menu as follows:
Settings
Volume
-
Buzzer tones
Setting the buzzer volume for programme end and system mes-
sages (information)
Keypad tone
-
Setting the buzzer volume for keypad tone.
Select an option using the and arrow buttons.
Confirm your selection with OK.
Keypad tone
When
has been selected you can adjust the volume im-
mediately. When
Buzzer tones
Warning
which tone,
volume for.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons (
Press OK to save the setting.
Buzzer tones
Keypad tone
Buzzer tones
has been selected you must first select
Programme end
or
, you would like to adjust the
Louder
Quieter
Louder
) and (
Settings
Programme end
Louder
Quieter
) to set the volume.
69