Siemens SIPROTEC 5 Manual page 141

Procedure
First identify all devices reachable via the PC communication interfaces. You can identify your device via
²
the DIGSI 5 project tree.
Establish a connection to a selected device.
²
If needed, you can assign a selected device to an existing project.
²
Device Identification via the DIGSI 5 Project Tree
Select the utilized PC interface from Online access (a).
²
Click the Update accessible devices button (b).
²
The accessible devices are displayed (c).
[scgerinf-090718, 1, en_US]
Figure 8-1
Establishing a Connection to Selected Devices
After device identification, the accessible devices are displayed in the project tree under the respective
communication interfaces of the PC.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Device Identification via the DIGSI 5 Project Tree
Operation in the Operating State
8.3 Operation Options
141