Table of Contents
Advertisement
Hardware Preparation and Installation
1
Introduction
Features
1-4
The CPN5365 is a hot swap, single-slot, CompactPCI
computer. It can serve as a standard CompactPCI peripheral CPU in a
nonhost slot. It is powered by a Mobile Pentium
chip set and includes up to 1GB of on-board system memory. The highly
integrated processor gives you a 16MB on-board solid-state disk, USB,
PCI EIDE, accelerated graphics, dual Fast Ethernet controllers, and
standard I/O, plus two PMC sites for additional expansion and other
functions on J4. The optional CPTM-01 TM gives you backplane I/O for
PMC sites and on-board devices.
Some models of the CPN5365 can be inserted in an H.110 system and will
not interfere with the H.110 interface. These models are the same as other
versions except that the J4 connector is removed.
The CPN5365 meets the needs of embedded application developers.
Typical applications include broadband data or intelligent network
switching, CTI server, industrial control and automation, military and
aerospace, and medical, scientific, or imaging products.
The CPN5365 Single Board Computer gives you these features:
Low power Pentium III processor for embedded applications
Up to 1GB on-board memory
On-board AGP video with 4MB integrated video memory
Dual Fast Ethernet controllers for monitoring and telecom
applications
Hot Swap compatibility allowing insertion or removal of the
CPN5365 while power is applied
On-board I/O via the front panel of the CPN5365 or via the CPTM-
01 transition module
Models available for H.110 interface
®
®
III processor and 440GX
Computer Group Literature Center Web Site
compliant
Advertisement
Table of Contents
