2-5.
CN-3571 Board
Preparation
1.
Remove the top cover. (Refer to
Procedure
1.
Disconnect the harness from the connector (CN801) on the CN-3571 board.
2.
Remove the two connector screws to detach the D-sub connector socket 9P.
3.
Remove the solder to detach the CN-3571 board.
D-sub connector socket 9P
CN-3571 board
Solders
CN801
Harness
4.
Install the removed parts by reversing the steps of removal.
MCC-3000MT
"2-2. Top
Cover". )
Connector screws
locking compound to screw thread
When installing connector screws,
apply locking compound to screw
threads.
2-8