Configuration Parameters; Cim / Pom Configuration Parameters - Siemens SIPLUS HCS Operating Instructions Manual

Configuration
8.3 Device/hardware configuration in the TIA Portal
8.3.3

Configuration parameters

8.3.3.1

CIM / POM configuration parameters

The configuration parameters are directly assigned to the respective modules and are set
during device configuration. They are transferred automatically on start-up and during re-
parameterization.
CIM parameters
Description
Rated voltage for line voltage compensation
Parameters for POM low-end
Description
Control mode
(Set once per POM)
Phase LX1
(Set once per POM)
Phase LX3
(Set once per POM)
Response to errors
(Set per channel)
Parameters for POM mid-range
Description
Control mode
(Set once per POM)
Phase LX1
(Set once per POM)
Phase LX3
(Set once per POM)
Response to errors
(Set per channel)
68
Range of values
207 to 300 V
•
Value range
Half-wave control (default):
•
Connected (default)
•
Not connected
•
Connected (default)
•
Not connected
•
Channel substitute value 0 (default)
•
Channel value retained
•
Value range
Half-wave control (default):
•
Soft start version 1
•
Soft start version 2
•
Soft start version 3
•
Connected (default)
•
Not connected
•
Connected (default)
•
Not connected
•
Channel substitute value 0 (default)
•
Channel value retained
•
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200