Installation/mounting
5.2 Mounting the rack
Mounting the rack
Install the rack in the following sequence:
Image 5-1
1
2
3
4
36
Mounting the rack
Drill the threads for the M6 fixing screws in the mounting plate. The positions of the pre-
fabricated mounting holes on the rack are shown in the drill hole template (see figure below).
Screw the fixing screws into the mounting plate but do not tighten
Position the rack in the control cabinet
Screw the rack firmly into place
②
③
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
①
SIPLUS HCS4200