Siemens SIPLUS HCS Operating Instructions Manual page 10

Introduction
1.1 Introduction
History
The following earlier release versions of these operating instructions have been published:
Edition
12/2014
10/2015
Scope of validity of this document
This documentation is valid for all components of the SIPLUS CMS4200 specified in these
operating instructions and describes the current delivery state.
Note
Note for devices up to firmware version 1.x
• A maximum of 12 POMs can be operated in one 12-unit rack.
• PMs as well as the DP connection are not available.
• The following applies to the reading data sets 152, 200 and 201 (Acyclic input data
(Page 99)): The information that is read is always for the full configuration, i.e. for 192
channels or 12 POMs.
• The data sets 160, 190 and 202 are not available.
Registered trademarks
SIPLUS ® is a registered trademark of Siemens AG.
10
Note
First edition
Expansion for operation of 24 POMs and one I/O module; rack for 4 POMs;
connection to PROFIBUS DP
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200