Siemens SIPLUS HCS Operating Instructions Manual page 28

Application planning
4.4 Installation location
Mounting position and clearance dimensions
● The rack is mounted in the horizontal position. The Power Output Modules (POM) are
inserted vertically in the rack.
● Maintain the minimum clearances from walls and other devices:
– Sides 0 mm (side-by-side mounting permitted), top 100 mm, bottom 100 mm for
Image 4-1
NOTICE
Damage due to overheating
• You must comply with all the instructions regarding the installation location and
• Ensure that the permissible ambient temperature range is not exceeded (see Section
28
ventilation
Clearances for installing an HCS4200
mounting position. Otherwise the device may malfunction or incur permanent damage
as a result of overheating.
Technical specifications (Page 127)).
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200