Epson RC620 Safety And Installation page 27

Controller (Non-UL)
Location
A
B
C
A
A
C
B
RC620 Safety and Installation Rev.8
Label
Controller
Note
Residual voltage exists.
electric shock, do not open the cover
while the Power is ON, or for 300
seconds after the Power is OFF.
Disconnect and lockout main power
before performing maintenance and
repair.
Do not connect the followings to the TP
port of RC620.
followings may result in malfunction of
the device since the pin assignments
are different.
OPTIONAL DEVICE dummy plug,
OP500, OP500RC, OP1, JP500,
TP-3**, and TP2
Refer to 4.2 Connection and Display
Language of Option TP1
Drive Unit
1. Safety
To avoid
Connecting to the
A
B
15