Huawei PDU8000 User Manual page 54

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Main
Menu
Issue 01 (2016-02-27)
Second-l Third-Level/Fou
evel rth-Level Menu
Menu
Buzzer Off
Settings Common
Com IP
munic address
a
ation assign
Serial
port baud
rate
Serial
port
address
SNMP
Configur
ation
Trap
Configur
ation
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function Description
Enables you to disables the
buzzer.
Enables you to configure the
language, time, time zone,
password, and contrast,
luminance, and saturation for
the LCD.
The IP address is used when
the PDU8000 connects to the
management system by
using SNMP. IP address
assign can be set to
Automatic (DHCP) or
Manual. In automatic
assignment mode, the
PDU8000 automatically
obtains the IP address,
subnet mask, and gateway
address. In manual
assignment mode, you can
modify the IP address,
subnet mask, and gateway
address for the SC.
This parameter is required
when the PDU8000 connects
to the management system
by using Modbus. It can be
set to 4800, 9600, or 19200.
This parameter is required
when the PDU8000 connects
to the management system
by using Modbus. The value
ranges from 0 to 254.
The SNMP V3 protocol is
used by default. The user
name is admin, the MD5
password is Changeme1,
and the DES password is
Changeme2.
The SNMP port can be set to
1 to 65535.
Enables you to configure
Trap IP address and Trap
port.
7 User Interface
Preset
Value
N/A
N/A
N/A
9600
1
161
N/A
48