Huawei PDU8000 User Manual page 101

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Step 7 Open the rear door of the PDC, and remove all cables connected to the output modules.
When removing cables, label the cables with corresponding terminal ports for later connection.
Step 8 Remove connective screws from output module copper bars from the top down. This section
uses the third output module as an example, as shown in
Figure 9-20 Removing connective screws
Step 9 Assign two persons to remove the three output modules at the front of the PDC from the top
down.
Step 10 Removing the switch on the third output module: Push the black clip of the switch outwards
using a flat-head screwdriver as shown in
the inner side of the PDC, as shown in
output module.
Mark the switches removed to ensure correct reinstallation.
Issue 01 (2016-02-27)
Figure
Figure 9-23 shows the recommended positions for installing the switch cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Operation and Maintenance
Figure 9-20.
Figure 9-21. Meanwhile, remove the switch along
9-22. Install the removed switch on the new
95