Figure 5-34 Self-Node Lpu Memory Allocation Window - Hitachi FL.NET User Manual

5 USER GUIDE
(1) Allocating the self-node LPU memory
With the setup tool named [S10V FL.NET SYSTEM], open the [self-node information]
window. In the "PCs allocment" section, enter the addresses for the PI/O to be allocated as
the self-node LPU memory area. After completion of input, click the
The entered settings are then saved in the FL.NET module.

Figure 5-34 Self-node LPU Memory Allocation Window

Input item
Area 1 address
(PCs allocation)
Area 2 address
(PCs allocation)
Description
Set the starting address for the allocation
of area 1 common memory and LPU
memory.
Set the starting address for the allocation
of area 2 common memory and LPU
memory.
Self-node LPU memory
allocation address
Acceptable selection range
See Table 5-6, "Address Ranges for
Common Memory Area Allocation in
LPU Memory. "
See Table 5-6, "Address Ranges for
Common Memory Area Allocation in
LPU Memory. "
5-36
Write button.
Enter the area 1
starting PI/O
address.
Enter the area 2
starting PI/O
address.