Table of Contents
Advertisement
5 USER GUIDE
[Contents of self-node status flag]
In the FL.NET module, the bit allocation for the self-node status flag is as indicated below:
15
14
13
12
11
10
2
2
2
2
2
2
2
Note: The above self-node status represents the contents that are transferred to the S10V.
The self-node information dialog box of the setup tool [S10V FL.NET SYSTEM]
allows you to reference the low-order byte (bits 2
9
8
7
6
5
4
3
2
2
2
2
2
2
2
2
Token hold timeout (Token monitoring time error flag)
FL.NET module setup error (Initialization error)
Frame wait status (Reception wait status flag)
Node number duplication
Network participation status
Transparent-message reception
User request processing in progress
1
0
2
2
Bits
=0: A token hold timeout has not occurred.
=1: A token hold timeout has occurred.
=0: Error has not occurred.
=1: Setup error.
=0: The network participation process is in progress or network
participation has already done.
=1: Although a request for participation has been transmitted
three or more times, the existence of a remote node cannot
be confirmed. The participation process is being
continuously performed.
=0: There are no duplicate node numbers.
=1: There is a node having the same number as the self-node.
=0: The self-node has not participated in the network.
=1: The self-node has participated in the network.
=0: There is no transparent message from a remote node.
=1: There is a transparent message from a remote node.
=0: A request from the user is being awaited.
=1: A request from the user is being processed.
5-106
Valid bit
7
0
through 2
) only.
Advertisement
Table of Contents
Troubleshooting
