Changing Connections - Hitachi FL.NET User Manual

5 USER GUIDE

5.4.4 Changing connections

Function: Set the communication type between the PCs and the PC.
Operation: The procedure is shown below.
(1) From the [Tool] menu of the [[S10V] FL.NET] window, click the
button.
(2) The [Communication type] window is displayed.
(The [Communication type] window will also be displayed automatically when the operation
mode is switched from offline to online by choosing [Online] from the [Module] menu.)
(3) When the communication type is RS-232C, click the [RS-232C] radio button and then select
"communication port."
(4) When the communication type is Ethernet, click the [Ethernet] radio button and then enter
the "IP address" of the connection destination.
5-120
Change connection