(4) Click the
Start monitoring button to monitor the RAS information.
Click the
Clear
Click the
Close
The RAS information is all reset to 0 by resetting or turning off and on the power supply.
5.5.8 Saving setups
Function: Save the self-node setup of the PCs side, PCs allocation of all nodes, and IP address
and subnet mask of the FL.NET module into the file on the PC.
For using this function, it is a prerequisite that the PCs is connected with the PC by cable.
Operation: The procedure is shown below.
(1) Select [Main] or [Sub] from the [Module] menu of the [[S10V] FL.NET] window.
(2) Select the [Save setups] menu.
button to reset all the RAS information to 0.
button to exit the [RAS information] window.
5-131
5 USER GUIDE