Product Description; Intended Use; Description Of Fwa 4630 - Bosch FWA 4630 Original Instructions Manual

en | 30 | FWA 4630 | Product description
3.

Product description

3 .1

Intended use

The FWA 4630 is only to be used for wheel alignment on
passenger vehicles and light commercial vehicles. Any
other or additional application does not constitute the
intended use.
3 .2

Description of FWA 4630

Together with the trolley, the FWA 4630 is suitable for mo-
bile applications at various measurement bays.
The basic version consists of a trolley with monitor,mouse,
mouse pad, PC, printer and the sensors. Mounts for stor-
age of the sensors are integrated into the side panels of
the trolley.
!
Always detach the sensors when transporting the
trolley as otherwise the sensors could be damaged
or the settings altered.
Fig. 1: Front view of FWA 4630 with accessories
1 Monitor
2 Keypad
3 Mouse
4 Printer
5 Sensor
6 PC unit
7 Plate
8 Filler
9 Sensor cable set
1)
Depending on version
1)
|
1 690 706 005 2011-05-11
Fig. 2: Rear view of FWA 4630
1 Multiple socket outlet
2 Brake clamp
3 Steering wheel arrester
4 PoE-switch
sensor hub
5 Distributor box
!
The distributor box is supplied with voltage directly
via the power cord and is not switched on and off
by way of the multiple socket outlet. The FWA 4630 is
therefore to be disconnected from the mains during
long periods of non-use (unplug mains connector).
i
The connectors of the sensors can be inserted in any
order in the hub (PoE-Switch).
i
The two distributor box connectors can be plugged
into the distributor box in any order.
i
If use is being made of an existing PC, check
whether this PC complies with the necessary speci-
fications. Information can be obtained from your
Bosch franchized dealer.
!
No other Ethernet users are to be connected to the
vacant PoE-Switch slots. Only use the LAN connect-
ing cables included in the scope of delivery.
Robert Bosch GmbH