Table of Contents
Advertisement
2-1 Control Panel
2-2 System Set-Up Panel
3 CONTROL PANEL switch
Selects which control panel controls this VTR.
INT: The control panel on the front panel controls
this VTR.
EXT: An external control panel, connected through
the CONTROL PANEL connector, controls this
VTR.
This switch is factory set to INT.
4 CHARACTER switch
Selects whether character signals such as time codes
are superimposed on the video signals output from the
COMPOSITE VIDEO OUTPUT 2 (SUPER)
connector.
ON: Superimposed.
OFF: Not superimposed.
This switch is factory set to ON.
5 SET UP SELECT switch
Selects the menu bank used to store set-up menu
settings for VTR operation. The VTR is set according
to the settings in the selected menu bank.
Pressing the MENU button displays the set-up menu
for the selected menu bank in the time counter display
and/or on the monitor screen.
For details on the set-up menu, refer to "3-2 Set-Up Menu"
on page 3-2 in this manual and the Maintenance Manual
Part 1.
2-8
Chapter 2 Locations and Functions of Parts and Controls
Advertisement
Table of Contents
