Lower Control Panel (Tape Transport Section) - Sony DVW-522 Operation Manual

2-1 Control Panel

2-1-2 Lower Control Panel (Tape Transport Section)

6 STANDBY button
Pressing this button in other than standby mode makes
it light and places the VTR in standby mode. Since the
head-drum rotates in standby mode, the tape can thus
start sooner than in non-standby mode.
When you press this button while in standby mode the
button extinguishes, the VTR exits standby mode, the
tape tension is released, and the drum stops rotating. If
more than eight minutes (factory preset time) elapse
while the VTR is in standby mode, the VTR
automatically exits standby mode to prevent tape and
head clogging.
7 SERVO indicator
Lights when the drum servo and capstan servo lock.
8 EJECT button
Ejects the cassette. Resets the display when CTL codes
appear in the time counter display.
6 STANDBY button
8 EJECT button
9 PLAY button
!º STOP button
Lower control panel (tape transport section)
7 SERVO indicator
9 PLAY button
Starts playback.
!º STOP button
Stops the tape (stop mode).
In stop mode, the tape is wound around the head-drum,
but the head-drum continues to rotate. The VTR enters
stop mode whenever you load a cassette.
Chapter 2 Locations and Functions of Parts and Controls
2-3