Parallel Connection Of 2 Psg's To Psu 5200 - Bosch PSU 5000 Series Instructions For Assembly And Operation Manual

Connection

11.7 Parallel connection of 2 PSG's to PSU 5200

PSU 5200
X11
1
2
3
4
5
6
1)
A suitable sensory
mechanism can be
connected to pins 5
and 6 for electrode
voltage feedback in
the event of closed- -
loop power control.
V U
for conductor cross- -
sections, please refer to
Section 11.3
11--16
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
Please note the information given in Section 9.4 !
For cable data, please re-
fer to Section 11.5
white
brown
green
yellow
1)
For connection of 2
PSG 3100 to PSU
5200 with a terminal
box, see next figure!
WARNING!
Danger through electrical voltage!
! !
The protective earth for the negative pole of the PSG can be interrupted by opening
the protective earth conductor connection at the PSG (see MPE point in diagram
above). In order to protect the operating personnel against dangerous electrical
voltages in the event of a break--down of the transformer primary side to the secon-
dary side, in this case, a suitable protective measure pursuant to DIN 57 113,
3 thermostatic
- -
switches connected
in series
black
yellow
white
current sensor
brown
PSG 3100
U
3 thermostatic
- -
switches connected
in series
black
yellow
white
current sensor
brown
PSG 3100
U
+
MPE
V
+
MPE
V
1070 078 224- -109