Psg 3200.00 A - Bosch PSU 5000 Series Instructions For Assembly And Operation Manual

10.2.4

PSG 3200.00 A

M 8 (6x)
15 deep
Thermal release
Rectifier
Contact surfaces
Accessories (supplied loosely): 4 straight pins ISO 8735 diam. 06x12
Standard:
Type:
No--- load
direct voltage
Continuous
forward current
Continuous forward
current power
Max. rated surge
forward current
max. direct current
(see diagram)
Degree of protection
Transformer
Prot. as delivered
1070 078 224- -109
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
Touch guard required for primary connection!
For connection, cover type and order data, cf. attached sheet no. SKT 0058
Nameplates
All sides 4 x M8 -- 10 deep
All sides 2 x ∅ 6
Earthing sign
Terminal connector
external
Primary
voltage
Level U1
100% duty cyc.
100% duty cyc.
(duty cycle, n periods)
Transformer
insulation class
Primary terminal area
H7
-- 8 deep
Connection lines
150 mm long (T+M)
Connection M:
Connection T1: 1 x rectifier set 80 ûC
Connection T2: 2 x transformer primary side 150 ûC
Earth
Prim.
Frequency
perman.
Voltage
current max.
Level U2 Level U3
Diode type
Dimensions without tolerances are subject
to "mean" deviations to DIN 7168
Standards:
Mass brown
Colour
Substitute
for drawing
dated
Installation
Dimensions of PSG
Cooling water
inlet G 1/4"
Connection T
Thermal release
Connection M
View X:
Current transformer
white, brown: Current transformer, secondary
measuring voltage U = 150 mV / kA  2.5 %
m
at ohmic resistance of 1kOhm
For removing the MPE neutral earth conductor, a
suitable protective measure to EN 50063 is to be
installed.
In this case, the earth connection between the trans-
former neutral and the earthing bolt must be crossed
out in an indelible manner.
Part no.
Short --- circuit values
Power factor Current
Level U4
Cooling water quantity:
Max. pressure drop:
MF Transformer ---Rectifier Unit
with
Date Name
Drawn
Checked
Cooling water
outlet G 1/4"
M 5 (4x)
15 deep
M 5 (4x)
10 deep
!
Level U5
10--7